Rocktron Utopia G100 - Manual (Page 61)

61
You now must store your changes. If you have made any changes to any param-
eter, the LED above the "STORE" button will light. Press the STORE button to save
the changes you have made. "STORE AT PRESET" will flash intermittently with the
current preset. If you would like to save this change to the current preset, press the
STORE button again. To save this adjusted preset (and the parameters you have
just changed) to a different preset location, use the PRESET SELECT knob to
choose the preset and then press the STORE button again. Note that doing this will
"over-write" the preset you are saving to.
STORE AT PRESET
NOTE: To exit Pedal Controllers at any time or cancel any changes you have made, turn
either the PRESET or FUNCTION SELECT knob. The word CANCEL will appear on the dis-
play.
Step 12
Pedal Controllers......continued.............
CURRENT PRESET
CANCEL