VDO WL X3 DW User Manual
Page 220
X3DW
VDO CYCLECOMPUTING
20
GB
SLO
PL
JP
JP
PL
SLO
GB
www.vdocyclecomputing.com
X3DW
21
In Sleep mode 2 the wireless receiver is also
switched off.
(after 15 min).
The display shows SLEEP
MODE/PRESS BUTTON
Before continuing to ride, you
must press a button to switch
the receiver back on.
The display for the speed and
the cadence flashes.
NAVIGATOR/SET
Using switch to
NAVIGATOR/RESET.
Confirm with
M
.
Security question: NAVIGATOR/RESET?
Confirm with
M
.
NAVIGATOR/SET DONE appears briefly and your
VDO computer automatically returns to the
NAVIGATOR/SELECT start menu.
Access next digit with
M
. Repeat steps until last
digit is flashing. Confirm with
M
.
NAVIGATOR/SET OK? Confirm with
M
.
NAVIGATOR/SET DONE appears as confirmation
and your VDO computer automatically returns to
the NAVIGATOR/SELECT menu.
Note: The navigator always runs automatically
at the same time, even if you have not set it.
Set navigator back to zero:
Using go to NAVIGATOR/
SELECT. Confirm with
M
.
Using go to DATA RESET/
SELECT. Confirm with
M
.
Use to go to the data you
want to reset:
B
DATA RESET/TOUR DATA
B
DATA RESET/TOT RIDE TM
B
DATA RESET/ODO TOTAL
B
DATA RESET/LAP DATA
B
DATA RESET/NAVIGATOR
Confirm your selection with
M
.
Query: SELECTED DATA / RESET?
ATTENTION: This step cannot be reversed.
Only confirm with
M
, if you want to delete the
selected data. The display confirms:
DATA RESET/RESET DONE.
Automatic return to SETTINGS/SELECT.
You use the RESET function to set any of these back
B
TOUR DATA
B
ODO TOTAL
B
TOT RIDE TM
B
NAVIGATOR
B
LAP DATA
With the respective reset modes, the following
information is deleted:
B
TOUR DATA: Day‘s tripdistance, ride time,
average speed, max. speed, cadence (option)
B
ODO TOTAL: Total km, km bike 1, km bike 2
B
TOTAL RIDE TM: Total ride time, ride time bike 1,
ride time bike 2.
B
NAVIGATOR: all values from the second
distance counter.
B
LAP DATA: All stored lap times, distances,
average lap values.
Using go to SETTINGS/
SELECT. Confirm with
M
.
You are now in setting mode
(pressing
C
for 3 seconds gets
you back to function mode).
5.9 Reset functions
5.8 Sleep mode
Your VDO computer is equipped with a two-fold
sleep mode function.
In sleep mode, a large part of the display is switched
off to save battery power. Time, service interval
display and the -symbol (if a timing function is
running) continue to be displayed.
Sleep mode 1 switches itself on after 5 minutes if
no speed impulses are processed and no button
is pressed.
Sleep mode 1 is ended when speed impulses are
processed again (when cycling) or a button is
pressed.
The computer now waits for speed and cadence
signals (as long as cadence is installed). Simply set
off riding now. The computer acquires the digital
encodings from the transmitter.