VDO WL X3 DW - Manual (Page 222)

X3DW VDO CYCLECOMPUTING 24
GB SLO PL JP JP PL SLO GB
www.vdocyclecomputing.com X3DW 25
LAP TIMER/MANUAL START
(use to switch LAP TIMER/
AUTO START. Confirm with
M .
If you have chosen AUTO START, you must now
enter the distance, after which the next lap is
automatically started (e.g. 1 km)
LAP TIMER… SET DISTANCE/
CONTINUE
The flashing digit is ready to
be entered. Enter the value using
. Change to the next digit
with M . Repeat up to the last
digit. Confirm with M .
LAP TIMER/SET OK? Confirm with M .
Return message LAP TIMER/SET DONE.
Return to SETTINGS/SELECT.
Set the flashing digits using
. Change to the next
digit with
M . Repeat up to the
last digit. Confirm with M .
TIME TRIAL/SET OK? Confirm with M .
Return confirmation on the display:
TIME TRIAL/SET DONE.
Return to SETTINGS/SELECT.
Setting lap timer:
On the lap timer, you can choose between starting
the next lap manually or automatically. If you
have chosen „automatic“, then you must specify a
distance, after which the next lap is then started
automatically.
Using go to SETTINGS/
SELECT. Confirm with
M . You are
now in setting mode (pressing
C for 3 seconds gets you back to
function mode).
Using go to TIMER/SET.
Confirm with
M .
Using select the timer you
want to set TIMER/LAP TIMER.
Confirm with
M .
TIMER 1+2…SET REPEATS/
CONTINUE. Using enter
the number of repeats you
want (e.g. in interval training).
Confirm with
M .
TIMER 1+2/SET OK? Confirm with M .
Return confirmation: TIMER 1+2/SET DONE
Your VDO computer automatically returns to the
menu SETTINGS/SELECT.
Setting TIME TRIAL timer:
Using go to SETTINGS/
SELECT. Confirm with
M . You are
now in setting mode (pressing
C for 3 seconds gets you back to
function mode).
Using go to TIMER/SET
Confirm with
M .
Using select the timer you
want to set TIMER/TIME TRIAL
Confirm with
M .
TIME TRIAL....SET DISTANCE/
CONTINUE. Now enter the
distance for the time trial.
Using select the timer you want to set:
B TIMER 1
B TIMER 2
B COUNTDOWN
Confirm with M . flashing digits are ready to be set.
Set hours using . Confirm with M .
Set minutes using . Confirm with M .
Set seconds using . Confirm with M .
SET OK? Confirm with M .
TIMER 1 or TIMER 2 or COUNTDOWN/SET DONE
appears briefly and your VDO computer automati-
cally returns to SETTINGS/SELECT.
Setting TIMER 1+2:
Using go to
SETTINGS/SELECT Confirm with
M . You are now in setting mode
(pressing C for 3 seconds gets
you back to function mode).
Using go to TIMER/SET.
Confirm with
M .
Using select the timer you
want to set TIMER 1+2.
Confirm with
M .