VDO WL X3 DW User Manual
Page 23
X3DW
VDO CYCLECOMPUTING
44
F
I
www.vdocyclecomputing.com
X3DW 45
D
GB
F
I
D
GB
ALARM/SET OK? Confirm with
M
.
The display confirms: ALARM/SET DONE.
Automatic return to SETTINGS/SELECT.
If you have set the alarm to ON, the alarm symbol
appears on the bottom left of the display
-Symbol.
ALARM...SET HOUR/CONTINUE
Set the hours using up/down.
Confirm the hour setting
with
M
.
ALARM...SET MINUTES/
CONTINUE. Set the minutes
using
. Confirm the minutes
setting with
M
.
CLOCK/SET OK? Confirm with
M
.
The display confirms: CLOCK/SET DONE.
Automatic return to SETTINGS/SELECT.
How to set the alarm:
Using
go to SETTINGS/
SELECT. Confirm with
M
.
You are now in setting mode
(pressing
C
for 3 seconds gets
you back to function mode).
Using
go to CLOCK/ALARM/
SET. Confirm with
M
.
CLOCK/ALARM/CLOCK SET.
Using
you can switch to
alarm set.
CLOCK/ALARM/ALARM SET.
Confirm with
M
.
ALARM OFF or ALARM ON
appears on the display.Switch the alarm OFF
or ON using
. With ALARM ON you come
to the alarm time setting. Confirm with
M
.
5.3 Setting the Clock/Alarm
How to set the clock:
Using
go to SETTINGS/
SELECT. Confirm with
M
You are now in setting mode
(pressing
C
for 3 seconds gets
you back to function mode).
Using
go to CLOCK/ALARM/
SET. Confirm with
M
.
CLOCK/ALARM/CLOCK SET.
Confirm with
M
.
CLOCK/ALARM/24-H-MODE.
You can switch to 12-H mode
using
. Confirm with
M
.
CLOCK...SET HOUR/CONTINUE
Set the hours using
.
Confirm the hour setting
with
M
.
CLOCK...SET MINUTES/
CONTINUE. Set the minutes
using
. Confirm the minutes
setting with
M
.
You can program the values on the distance coun-
ter at any time (e.g. at the end of a season).
Using go to SETTINGS/
SELECT. Confirm with
M
.
You are now in setting mode
(pressing
C
for 3 seconds gets
you back to function mode).
Using
go to ODOMETER/
SET. Confirm with
M
.
ODOMETER/ODO BIKE 1
(use to go to setting for
BIKE 2). Confirm with
M
.
ODO BIKE 1 ...SET DISTANCE/
CONTINUE.
5.4 Setting the total kilometres
You can set the flashing digits
using .
To access the next digit, con-
firm with
M
. Repeat the steps
until the last digit on the right
is flashing. Confirm with
M
.
ODO BIKE 1/SET OK? Confirm with
M
.
The display confirms ODO BIKE 1/SET DONE.
Automatic return to SETTINGS/SELECT.