VDO WL X3 DW - Manual (Page 29)

X3DW VDO CYCLECOMPUTING 56
F I I F GB D
www.vdocyclecomputing.com X3DW 57
GB D GB D
9. Technical spezifications
Speed range:
for wheel size 2155 mm, min 2.5 km/h, max 199.5 km/h
Ride time measurement range:
up to 23:59:59 HH:MM:SS
Stopwatch measurement range
up to 23:59:59 HH:MM:SS
Day‘s trip counter measurement range:
up to 999.99 km or mi
NAVIGATOR measurement range:
up to 999.99 km or mi
Total KM 1 and 2 measurement range:
up to 99,999 km or mi
Total kilometers measurement range:
up to 199,999 km or mi
Wheel circumference setting range:
from 100 mm to 3999 mm (3.9 to 157.4 inches) Computer:
approx. 45 x 52 x 16 mm, weight: approx. 45 g
Handlebar holder:
weight: approx. 15 g
Transmitter:
weight approx. 20 g
Computer battery:
3V, type 2032
Transmitter battery:
3V, type 2032
Computer battery life-span:
600 cycling hours, approx. 12,000 KM (7400 M)
Transmitter battery life-span:
1000 cycling hours (approx. 20,000 KM (12,000 M)
Working temperature of the display:
-15 °C to +60 °C
8. Troubleshooting
Here you can find a list of possible faults, their causes and what you can do about them:
Error Possible cause Correction
Half segments on the display
(e.g. after a battery change) Computer software not running
correctly after battery change Take out battery and insert
again
No speed display Distance from sensor to
magnet too big Correct position of sensor
and magnet
No speed display Computer not properly clicked
in the handlebar holder Place computer head in the
handlebar holder, twist until
it clicks
No speed display Wheel circumference is not
correctly set or is at zero Set wheel circumference
Display becomes weak Battery dead Check battery, replace if nec.
Display becomes weak Temperatures under 5° make
the display sluggish At normal temperatures the
display will work normally
again