VDO WL X3 DW User Manual
Page 223
X3DW
VDO CYCLECOMPUTING
26
GB
SLO
PL
JP
JP
PL
SLO
GB
www.vdocyclecomputing.com
X3DW 27
6.3 Operating the timers
Recalling lap data:
Using go to SETTINGS/
SELECT. Confirm with
M
. You are
now in setting mode (pressing
C
for 3 seconds gets you back
to function mode).
Using go to LAP DATA/
RECALL. Confirm with
M
.
LAP DATA/LAP 1.
Using you can selected the
lap you want or confirm
lap 1 with
M
.
Using you now get the
following for lap 1:
B
TIME
B
DISTANCE
B
AVG SPEED
Using you can recall the corresponding
values for all other laps.
Pressing
C
for 3 seconds brings you back to
function mode.
ATTENTION: The stored lap data are deleted and
overwritten if lap 1 is started again or 30 laps are
exceeded.
STOPPWATCH
Start with
M
. Stop with
M
. Reset with
C
for 3 seconds.
TIMER 1, TIMER 2, TIMER 1+2
Start with
M
. Stop with
M
. Reset with
C
for 3 seconds.
COUNTDOWN
Start with
M
. Stop with
M
. Reset with
C
for 3 seconds.
TIME TRIAL
Start with
M
. Stop with
M
. Reset with
C
for 3 seconds.
LAP TIMER
Start the 1
st
lap with
M
. Start all other laps with
C
.
Stop with
M
. Reset with
C
- 3 seconds, the lap
counter is set to 1. The stored lap data are deleted
and overwritten if lap 1 is started again or 30 laps
are exceeded.
Or in case of automatic lap start: next lap starts
automatically once the distance entered has been
reached.
The stored lap data can be recalled under
SETTINGS/SELECT.
7. Terms of guarantee
Please contact the dealer from whom you
purchased the device for all complaints and
guarantee claims. Or send your complaint
directly to:
Cycle Parts GmbH
Große Ahlmühle 33
D-76865 Rohrbach (Germany)
We would be pleased to answer any technical
questions you might have at the following
hotline number:
+49 (0) 63 49 - 96 35 - 10.
Additional technical information is available at:
www.vdocyclecomputing.com
We reserve the right to make technical changes in
the course of further development.
VDO Cycle Parts grants a guarantee of 5 years
from the date of purchase for your VDO computer.
The guarantee covers material and processing de-
fects on the computer itself, on the sensor/trans-
mitter and on the handlebar holder. Cables and
batteries as well as assembly materials are excluded
from the guarantee. The guarantee is only valid
if the parts concerned have not been opened
(exception: battery compartment on the compu-
ter), no force has been used and there is
no sign of wilful damage.
Please take care to keep the receipt as it must
be presented in the event of a complaint.
If the complaint is justified, you will receive a
comparable replacement appliance from us.
You are not entitled to an identical replacement
model if the model in question is no longer in
production due to a change of model.