Vortech 2006-2010 6.1L Hemi Cars (Charger, Challenger, Magnum, 300C) User Manual
Page 19
P/N: 4CL020-010 v6.0, 02/28/2012
©2012 Vortech Engineering, Inc
All Rights Reserved, Intl. Copr. Secured
5
A. Remove the three bolts securing the power steer-
ing pump to the head.
B. Loosely attach the steel bracket to the back of
the primary mounting plate.
C. Attach the supercharger mounting plate to the
primary mounting plate using the supplied M8
x90mm bolts and spacers.
D. Without installing hardware, sandwich the
power steering pump between the steel
plate and the supercharger mounting plate.
2009-2010 5.7L engines require removal of
the inlet fitting for the power steering pump
to be replaced with the supplied fitting. Set
aside the hose as it will be used in a later step.
Refer to Fig. 4-b for final installation reference.
4.
SUPERCHARGER MOUNTING PLATE INSTALLATION
Fig. 4-a
NOTE:
This is difficult to accomplish with the
power steering lines connected. It may be
easier to completely remove the power
steering pump from the vehicle and install
into the mounting bracket assembly out
of the vehicle.
SUPERCHARGER
MTG PLATE
PRIMARY MTG
PLATE
STEEL
BRACKET
Fig. 4-b (2009-2010 5.7L Challenger and
M6 6.1L)