Vortech 2006-2010 6.1L Hemi Cars (Charger, Challenger, Magnum, 300C) User Manual
Page 21
P/N: 4CL020-010 v6.0, 02/28/2012
©2012 Vortech Engineering, Inc
All Rights Reserved, Intl. Copr. Secured
7
Steps I, J and K apply to 2009-2010 5.7L
Challenger M6 Only:
I. Remove power steering hose from pump to res-
ervoir. Cut hose as depicted in Figure 4-e Set
aside the two longer pieces of hose and discard
the two shorter pieces. Replace the small bend
with a ¾ hose union and attach the 2 pieces of
hose together.
J. Install hose so that the end with the single bend
attaches to the pump. Do not install clamps. Mark
union for correct clocking. Remove hose from car
and install stepless clamps at union (See Fig.
4-f).
K. Install hose assembly back into car using the
factory clamp to secure the hose to the reservoir
and a supplied hose clamp to attach the hose to
the power steering pump.
Fig. 4-e (2009-2010 5.7L
Charger/Challenger)
Fig. 4-f (2009-2010 5.7L
Charger/Challenger)
4.
SUPERCHARGER MOUNTING PLATE INSTALLATION, CONT’D
Fig. 4-g (2009-2010 5.7L
Charger/Challenger)