Vortech 2006-2010 6.1L Hemi Cars (Charger, Challenger, Magnum, 300C) User Manual
Page 27
P/N: 4CL020-010 v6.0, 02/28/2012
©2012 Vortech Engineering, Inc
All Rights Reserved, Intl. Copr. Secured
13
Fig. 9-d
9.
CHARGE AIR COOLER RADIATOR INSTALLATION
1. (Challenger vehicles only. All others
skip to step 2) Attach the supplied brackets
to each side of the CAC radiator as shown in
figs. 9-a and 9-b. Remove the two small plastic
panels from the front bumper cover as shown
in Fig. 9-c. Skip to step 5.
2. (300C vehicles only. All others skip to
step 3) Attach the longer pair of the supplied
brackets to the charge air cooler radiator. The
driver side bracket should be attached by sand-
wiching the supplied ½” long spacer between the
bracket and the CAC radiator. (See Fig. 9-d).
With the foam bumper installed on the vehicle
position the CAC radiator with brackets on top
of the steel bumper so that it has about ½” clear-
ance behind it. Mark the four frontmost mounting
bracket holes to be drilled. Remove assembly,
drill 11/64” holes and install the CAC radiator
using four #12 sheet metal screws. (See Fig.
9-e). 300C models skip ahead to 9.5
3. Attach the shorter pair of the supplied brackets
to the charge air cooler radiator. The driver side
bracket should be attached by sandwiching the
supplied ½” long spacer between the bracket
and the CAC radiator. (See Fig. 9-f).
Fig. 9-e
Fig. 9-f
Fig. 9-a
Fig. 9-b
Fig. 9-c
SPACER