Altera Stratix IV GT 100G - Manual (Page 30)

6–8 Chapter 6: Board Test System
Using the Board Test System
Stratix IV GT 100G Development Kit User Guide October 2010 Altera Corporation
1 If you exceed the 16 character display limit on either line, a warning message appears.
User DIP Switches
The read-only User DIP switches control displays the current positions of the
switches in the user DIP switch bank SW4. Change the switches on the board to see
the graphical display change accordingly.
User LEDs
The User LEDs control displays the current state of the user LEDs. Toggle LEDs
buttons to turn the board LEDs on and off.
Push Button Switches
The read-only Push button switches control displays the current state of the board
user push buttons. Press a push button on the board to see the graphical display
change accordingly.
Ethernet
Click Start Simple Socket Server to run the simple_socket_server.elf program that
was downloaded into FPGA during configuration.