The qsfp tab, Status –24, The qsfp tab –24 – Altera Stratix IV GT 100G User Manual
Page 46: Status
6–24
Chapter 6: Board Test System
Using the Board Test System
Stratix IV GT 100G Development Kit User Guide
October 2010
Altera Corporation
Status
These controls display current transaction performance analysis information collected
since you last clicked Start:
■
PLL lock
—Shows the PLL locked or unlocked state.
■
Pattern sync
—Shows the pattern synced or not synced state. The pattern is
considered synced when the start of the data sequence is detected.
■
TX
and RX performance bars—Show the percentage of maximum theoretical data
rate that the requested transactions are able to achieve.
■
MBps
—Shows the number of megabytes of data analyzed per second for transmit
and receive.
The QSFP Tab
The QSFP tab allows you to do loopback testing on this interface using different data
patterns, PMA settings, and clock speeds using the Clock Control application.
Figure 6–12
shows the QSFP tab.
Figure 6–12. The QSFP Tab