Interlaken tab, Interlaken tab –27, Start –27 stop –27 – Altera Stratix IV GT 100G User Manual
Page 49: Interlaken
Advertising
Chapter 6: Board Test System
6–27
Using the Board Test System
October 2010
Altera Corporation
Stratix IV GT 100G Development Kit User Guide
Interlaken
Tab
The Interlaken tab allows you to do loopback testing on this interface using different
data patterns, PMA settings, and clock speeds using the Clock Control application.
Figure 6–13
shows the Interlaken tab.
1
You must have both Interlacken loopback cards installed on your 100G development
board for this test to work correctly.
The following sections describe the controls on the Interlaken tab.
Start
The Start control initiates the Interlaken loopback test.
Stop
The Stop control terminates the Interlaken loopback test.
Figure 6–13. The Interlaken Tab
Advertising