Dish Network Duo 322 - Manual (Page 45)

Page 40
Chapter 3
Using the System
Maximum Number of Event Timers
You cannot create an unlimited number of event timers. If you try to create
too many, the receiver displays a menu giving you the option to delete an
existing timer. If you do not delete an existing timer, you will not be able to
create any new ones.
Editing an Event Timer
• You can edit almost any feature of an event timer.
• You can edit both automatic and manual event timers.
• Editing an automatic event timer converts the timer to a manual event
timer that operates at the times you set, not the actual program times.
1. Press the MENU button.
2. Select the Timers option.
3. The receiver displays the Event Timer Management menu.
4. Select the event timer that you want to edit. A check mark appears in
the box next to the event timer. Select the Edit option.
5. You may change the Timer Type , Timer Frequency , or Channel.
To do this, select each option that you want.
6. If you want to change the Start Time, the End Time, or the Date ,
select the Date/Time option to display the Set Date/Time
for Manual Timer menu. Otherwise, skip to step 9, below.
7. Use the NUMBER PAD buttons to enter the Start Time (this includes
selecting AM or PM) and the End Time (this includes selecting AM or
PM).
8. Use the NUMBER PAD buttons to enter the Date.
Tip: The receiver
deletes the “Freq:
Once” event
timers when they
operate. You must
delete all other
types of event
timers yourself.
Tip: Remember
that editing an
automatic event
timer converts
the timer to a
manual event
timer. This is why
the receiver
displays the Edit
a Manual Event
Timer menu.