Chapter 4, On-screen messages, Page 64 reference – Dish Network Duo 322 User Manual

Page 69

Advertising
background image

Page 64

Reference

Chapter 4

On-Screen Messages

This table describes some on-screen messages in the order of their message numbers. Find the message

number in the upper right corner of the message displayed on your TV screen, and then find the matching

number in this table.

Message Number

Possible Reason

What to Do

112

Heavy rain, snow, or cloud cover

may be interfering with transmission

of the satellite signal, or there may

be other interference.

Note the local weather conditions. Contact your MDU building

manager for further information/instructions

005

The receiver may not yet have been

electronically linked with the Smart

Card, via the satellite signal. The

satellite dish may have moved so

that it is no longer picking up the

satellite signal. The cable

connections may have loosened or

have moisture inside. There may be

an interruption of the satellite signal.

If you have authorized the receiver, wait a few minutes to see if the

message is removed. Make sure that all required cables are in place,

and check that all cable connections are tight and dry (for outdoor

cables).

Check that the Signal Strength bar in the QAM/Signal menu is

green and displays the word Locked. If not, contact your MDU

building manager. If you have not authorized the receiver, call the

Commercial Customer Service Center for help.

006

The receiver may not be connected

to an active telephone line.

The Smart Card credit limit may

have been suspended.

You must connect the receiver to an active telephone connection at

all times. If you install two or more receivers, you must connect

each receiver to an active telephone connection at all times.

Review your pay per view purchases to check the Smart Card credit

limit.

008

Phone signal not working correctly.

If connected with DSL phone line, install a DSL filter between the

receiver and the telephone wall jack. You can obtain the filter from

your DSL provider.

011, 012

Viewers in specific areas are

prohibited from watching certain

programs.

For example, viewers who live close

to a particular football stadium may

be prohibited from watching football

games that are played in that

stadium.

Remember that the program providers specify which programs

are “blacked out” for which viewers, not DISH Network.

013, 014

You may have tried to tune to a

program on a channel which you

have not bought.

You must buy a channel before you can tune to a program on that

channel. Call the Customer Service Center to buy the channel, or if

you believe this message was displayed by mistake.

015

You may have just plugged in the

receiver, and it is acquiring the

satellite signal. Or, the receiver may

have temporarily lost the signal.

Wait a few minutes to see if the message is removed. Make sure that

all required cables are in place, and check that all cable connections

are tight and dry (for outdoor cables).

Check that the Signal Strength bar in the QAM/Signal menu is

green and displays the word Locked. If not, contact your MDU

building manager.

018

The receiver may not be connected

to an active telephone line.

The Smart Card credit limit may

have been exceeded.

You must connect the receiver to an active telephone connection at

all times. If you install two or more receivers, you must connect

each receiver to an active telephone connection at all times.

Review your pay per view purchases to check the Smart Card credit

limit.

Call the Customer Service Center for help checking the credit limit,

and/or to get authorization to make a purchase.

022

The receiver may not yet have been

electronically linked with the Smart

Card, via the satellite signal. The

satellite dish may have moved so

that it is no longer picking up the

satellite signal. The cable

connections may have loosened or

have moisture inside. There may be

an interruption of the satellite signal.

If you have authorized the receiver, wait a few minutes to see if the

message is removed. Make sure that all required cables are in place,

and check that all cable connections are tight and dry (for outdoor

cables).
Check that the Signal Strength bar in the QAM/Signal menu is

green and displays the word Locked. If not, contact your MDU

building manager.

Advertising
This manual is related to the following products: