Dish Network Duo 322 - Manual (Page 61)

Page 56
Chapter 3
Using the System
Check the Device Codes
You can find out what device code you’ve set for each remote mode.
Control a TV (or a Second TV)
TV Mode Button
To use the remote to operate a television, you must press the TV
mode button to set the remote to TV mode. The TV mode button’s
back light turns ON to show that the remote is set to TV mode.
Make sure to keep the remote in TV mode to use the buttons as
described in this section.
Power Button
Press the POWER button to turn the television ON or OFF.
7. Turn the device back on and
try some other buttons to
make sure they work.
Press the POWER button to turn the
device back on. Try some other
buttons to make sure they work.
Sometimes, the POWER button
works when other buttons don’t.
8. Repeat this procedure until
you’ve tried all the codes.
You may need to repeat the scan to
find the best code for your device.
1. Press and hold the mode
button until all the other mode
buttons light up, and then let
go of the button.
The mode button flashes.
For example, hold the TV mode
button for a TV until all of the other
mode buttons light. When you let
go, the TV mode light will flash.
2. Press the POUND (#) button
twice. Watch the mode light to
determine your code. The
mode button flashes the
number for each digit of the
device code, with a pause
between the groups of flashes.
A quick flash is for zero.
For example, if the code is 570, the
mode button flashes five times,
pauses, flashes seven times, pauses,
and flashes once quickly.
3. For AUX mode only. The first
group of flashes tells you what
the AUX mode controls. A
quick flash (zero) before the
three-digit code is for a TV;
one regular flash is for a VCR
or DVD player; and two
flashes is for a tuner, or
amplifier.
For example, if the TV code is 570,
the AUX mode button flashes once
quickly (indicating 0 for TV),
pauses, flashes five times, pauses,
flashes seven times, pauses, and
flashes once quickly.
Tip: This
procedure
explains how to
find out what the
device code is
that you set for
each remote
control mode.
Tip: Some of the
features
described in this
section may not
work with your
VCR or DVD
player. If a
remote control
button is not
described in this
user guide, it
will not work
with the device
you want to
control.