Dish Network Duo 322 - Manual (Page 49)

Page 44
Chapter 3
Using the System
When You Have Locked the Receiver
If you try to access a locked item or open the Parental and System
Locks
menu, the receiver displays a message prompting you to enter the
password.
The receiver allows you three tries to enter the correct password. If you fail
to enter the correct password, the receiver does not allow more tries for
several minutes.
If you enter the correct password, you can access the locked item or open
the Parental and System Locks menu.
If you exit a locked item or close the Parental and System Locks
menu, you must enter the password again to access the item or open the
menu again.
If you forget your password, call the Commercial Customer
Service Center. You may need to provide the following
information: (1) your name; (2) your address; (3) your
telephone number; (4) the receiver serial identification
number; and (5) your Personal Identification Number (PIN),
if used.
Locking and Unlocking the Receiver
Lock the receiver for any receiver Parental and System Locks you set
to take effect. To lock the receiver, you must first create a password. If you
forget your password, you will need to call the Customer Service Center.
1. Press the MENU button to display the Main menu.
2. Select the Locks option to display the Parental and System Locks
menu.
Note: If this option appears as Unlock System, the receiver is
already locked. If this option appears as Lock System, the receiver is
unlocked.
3. Select the Lock System or Unlock System o ption as
appropriate. The receiver displays a message prompting you
to enter a password.
Note:
If this option appears as Unlock System instead, the receiver is
already locked.
Tip: Be sure to
make a note of the
password you
create and store it
in a secure place.