Changing program languages, Control other devices with the remote – Dish Network Duo 322 User Manual
Page 58
Page 53
Changing Program Languages
Page 53
2. Select the System Setup option.
3. Select the Installation option.
4. Select the Factory Defaults option.The receiver displays a
Warning
message, prompting you to confirm that you want to
reset the receiver.
5. Select the Yes option to confirm the reset. The receiver resets, and then
displays the
Installation and Setup menu.
Changing Program Languages
You may be able to change the language of some programs. An alternate
language may not be available for all programs. Some programs, such as
movies, show at the start whether an alternate language is available. An
alternate language applies only to the audio part of a program and does not
change the language used in the menus displayed by the receiver.
1. Press the MENU button.
2. Select the System Setup option.
3. Select the
Alternate Audio
option.
4. Select the language you want in the Languages list.
Note: Alternate provides visually-impaired customers with an audio
description of the program, if available.
5. Select Save to save your language choice. The receiver displays the
System Setup
menu.
6. Press VIEW TV to exit the
System Setup menu.
Control Other Devices with the Remote
Remote Control Modes
You can set the remote to four different modes to control the receiver or other
devices. This section explains how to set up the remote to control a device, such
as a satellite TV receiver, a TV, a VCR, a DVD player, a tuner, or an amplifier.
To set the remote to the right mode for a device, use the remote control’s mode
buttons, SAT (satellite receiver), TV, VCR (for a VCR or a DVD player), and
AUX (“auxiliary,” for a DVD player, or an audio amplifier). To change the
mode, press the button for the device you want the remote to control. The mode
button flashes once to show you’ve set the remote to that mode.
Tip: You can
choose an alter-
nate language (if
available) but this
applies only to the
audio part of a
program and does
not change the
language used in
the menus
displayed by the
receiver.