Dish Network Duo 322 - Manual (Page 62)

Page 57
Control Other Devices with the Remote
Page 57
Mute Button
Press the MUTE button to turn off the sound. Press it again to
restore the sound.
Volume Button
Press the minus (-) side of this button to lower the sound
volume. Press the plus (+) side of this button to raise the
sound volume.
Select Button
The SELECT button works as the Enter button for a TV.
Up/Down (Arrow) Buttons
Use the UP/DOWN ARROW buttons to change channels on the
TV.
Recall Button
Press the RECALL button to return to the last channel you were
watching. Press it again to switch between the last two channels that
you watched.
Number Buttons
Use the NUMBER buttons to enter numbers in a menu, or
to go directly to a new channel.
Control a VCR or a DVD Player
Some of the features described below may not apply to the device.
See your device owner’s manual for details about its features. If a
remote control button is not described in this section, it does not
work in VCR mode.
VCR Mode Button
To use the remote to operate a VCR or DVD player, first set up the
remote, then press the VCR mode button to set the remote to VCR
mode. The VCR mode button’s back light turns ON to show that the remote is
set to VCR mode. Make sure to keep the remote in VCR mode to use the
buttons as described in this section.
Tip: To operate
another device
such as a VCR,
you must first set
up the remote to
control the VCR,
and then press the
VCR mode button
on the remote.