Applied Motion STR2 - Manual (Page 11)

11
STR2 Hardware Manual 920-0059B
1/30/2014
power supply.
The tables below and on the net page list the maximum current required for each motor at sev-
eral common power supply voltages. Please consider this information when choosing a power
supply.
Table 1: STR2 Power Supply Current
All motors connected as indicated.
Multiple Drives Sharing One Power Supply
You can use one supply to power multiple drives. The worst case condition occurs when all the
drives are running simultaneously. In this case, just add up the power supply currents for each to
determine the total power supply current requirement.
Motor Connection
Current
Setting (A)
Max Power Supply Current (A)
12VDC 24VDC 48VDC
HT08-020 4 leads 0.42 0.95A 0.95A N/A
HT08-021 4 leads 0.42 0.95A 0.95A N/A
HT11-012 4 leads 1.20 0.6A 0.6A N/A
HT11-013 4 leads 1.20 0.95A 0.95A N/A
5014-042 4 leads 1.0 0.87A 0.87A N/A
HT17-268 parallel 1.61 1.0A 1.0A 1.0A
HT17-271 parallel 2.04 1.3A 1.3A 1.3A
HT17-275 parallel 2.04 1.32A 1.32A 1.32A
HT23-595 series 2.20 1.36A 1.36A 1.36A
HT23-598 series 2.20 1.56A 1.56A 1.56A
HT23-601 series 2.20 1.4A 1.4A 1.4A