15 swm24 hardware manual – Applied Motion SWM24IP-3EE User Manual
Page 15
If someone were to change the setting and not write it down or tell anyone (I’m not naming names here, but you
know who I’m talking about) then you will not be able to communicate with your drive. The only way to “recover”
it is to apply power to the SWM24 with the network cable unplugged. The SWM24 will detect this condition and
revert to a recovery address of 10.10.10.10. You may then connect your cable to the network and use ST Con-
figurator to upload and change the stored address (using Edit IP Address Table under the Drive menu).
Your PC, or any other device that you use to communicate with the drive, will also have a unique address.
Use the standard class B subnet mask (i.e. “255.255.0.0”). The mask for the recovery address is the standard class A
(i.e. “255.0.0.0”).
One of the great features of Ethernet is the ability for many applications to share the network at the same time.
15
SWM24 Hardware Manual
920-0068B
10/31/2013