Applied Motion SWM24IP-3EE - Manual (Page 18)

Option 2: Connect a Drive Directly to Your PC
When you first receive your SWM24 from the factory, you will need to do this:
1. Connect one end of a CAT5 Ethernet cable into the LAN card (NIC) on your PC and the other into the drive.
You don’t need a special “crossover cable”; the drive will automatically detect the direct connection and make
the necessary physical layer changes.
2. Set the IP address on the drive to “10.10.10.10”.
3. To set the IP address of your PC:
a. On Windows XP, right click on “My Network Places” and select properties.
b. On Windows 7, click Computer. Scroll down the left pane until you see “Network”. Right click and
18
SWM24 Hardware Manual
920-0068B
10/31/2013