Applied Motion SWM24IP-3EE - Manual (Page 17)

Enter the desired IP address in ST Configurator by using the Edit IP Address Table under the Drive menu. If
your network uses addresses starting with 192.168.0, the most common subnet, you will want to assign an ad-
dress beginning with 192.168.0.
To change your PC’s subnet mask:
1. On Windows XP, right click on “My Network Places” and select properties. On Windows 7, click Computer.
Scroll down the left pane until you see “Network”. Right click and select properties. Select “Change adapter
settings”
2. You should see an icon for your network interface card (NIC). Right click and select properties.
3. Scroll down until you see “Internet Properties (TCP/IP)”. Select this item and click the Properties button. On
Windows 7 and Vista, look for “(TCP/IPv4)”
4. If the option “Obtain an IP address automatically” is selected, your PC is getting an IP address and a subnet
mask from the DHCP server. Please cancel this dialog and proceed to the next section of this manual: “Using
DHCP”.
5. If the option “Use the following IP address” is selected, life is good. Change the subnet mask to
“255.255.0.0” and click OK.
17
SWM24 Hardware Manual
920-0068B
10/31/2013