DoorKing 1802 User Manual
Page 26
26
2.3.2 Controlling a Gate Operator and Pedestrian Gate (or Door)
When controlling a gate operator and pedestrian gate (or door), relay 1 is typically used to control the
gate operator while relay 2 is typically used to control the door or pedestrian gate. Note that the
electric strike and the magnetic lock are powered from their own power supply. The normally open
(NO) contact is used for electric strikes and the normally closed (NC) contact is used for magnetic
locks.
A variation of this diagram is for the system to control two doors or two gates.
10 Relay 1 Common
11 Relay 1 Normally Closed
12 Relay 1 Normally Open
M a i n
T e r m i n a l
Strip
Relay 2 Common
Relay 2 Normally Closed
Relay 2 Normally Open
Relay 2 Terminal
C o n n e c t i o n s
Electric
Strike
M a g n e t i c
L o c k
G a t e
O p e r a t o r
A N D
O R