DoorKing 1802 - Manual (Page 45)

45
5.2.4 Entry Code Time Zone Enable / Disable
The entry code time zones can be turned off or on remotely from a touch-tone telephone at any time
without changing the time zone boundaries. To program the time zone boundaries, see sections
2.4.3 and 2.4.4. Entry code time zones can also be turned off or on at the system keypad by skipping
step 1 and proceeding directly to step 2 in the sequence below.
1. Call the telephone number that the entry system is installed on. The system will answer
with a short tone (beep). Note: the number of rings before the system answers is
dependent on the programming in 3.1.8.
2. Press

for four-digit entry code time zones or press

for five-digit entry code
time zones.
3. Enter the four-digit master code BBBB (beep).
4. Press

(beep) to turn the time zone OFF, or press

(beep) to turn the time zone
ON.
5. Hang up or if at the system keypad, press  together (beeeeeep).
5.2.5 Auto Relay Time Zone Enable / Disable
The four time zones that automatically activate and deactivate the relays can be turned off or on from
a touch-tone telephone at any time without changing the time zone boundaries. To program the auto
relay activation time zone boundaries, see section 2.4.2. Auto relay time zone boundaries can also
be turned off or on at the system keypad by skipping step 1 and proceeding directly to step 2 in the
sequence below.
1. Call the telephone number that the entry system is installed on. The system will answer
with a short tone (beep). Note: the number of rings before the system answers is
dependent on the programming in 3.1.8.
2. Press
 and enter the four-digit master code BBBB (beep).
3. Enter the time zone number B that you want to turn off or on, then press (beep).
4. Press 
(beep) to turn the time zone OFF, or press 
(beep) to turn the time zone
ON.
5. Hang up or if at the system keypad, press 0# together (beeeeeep).