DoorKing 1802 - Manual (Page 35)

35
3.3.1 Four-Digit Entry Code Programming
This programming sequence programs four-digit entry codes into the system memory. The number of
four-digit entry codes that can be programmed is the same as the telephone number memory
capacity, plus 12. We suggest that all entry codes that are programmed into the system be listed with
the names of persons that they have been assigned to (see appendix).
1. Press
 and enter the four-digit MASTER CODE BBBB (beep).
2. Enter the four-digit entry code BBBB then press (beep).
3. Repeat step 2 to enter additional entry codes.
4. Press

TOGETHER to end this programming step (beeeeeep).
3.3.2 Delete Four-Digit Entry Codes
1. Press

and enter the four-digit MASTER CODE
BBBB
(beep).
2. Enter the four-digit entry code
BBBB
to be deleted and then press (beep).
3. Repeat step 2 to delete more entry codes.
4. Press

TOGETHER to end this programming step (beeeeeep).
3.3.3 Delete All Four-Digit Entry Codes
This programming sequence deletes all four-digit entry codes that have been programmed
into the system. CAUTION: this programming step is irreversible once it is started.
1. Press

and enter the four-digit MASTER CODE
BBBB
(beep).
2. Press then press (beep). This programming sequence will automatically
end itself. This will be indicated by a long tone (beeeeeep).
3.3.4 Four-Digit Entry Code Divide Number
The four-digit entry codes can be made to activate either relay 1 or relay 2 by programming a four-
digit divide number. Four-digit entry codes equal to or less than the divide number will activate relay
1. Four-digit entry codes greater than the divide number will activate relay 2. HINT: you can make all
four-digit entry codes (except 0000) activate relay 2 by programming divide number 0000, or make all
four-digit entry codes activate relay 1 by programming divide number 9999.
The factory default divide number is 9999.
1. Press

and enter the four-digit MASTER CODE
BBBB
(beep).
2. Enter the four-digit divide number
BBBB
then press (beep).
3. Press

TOGETHER to end this programming step (beeeeeep).
3.3 ENTRY CODE PROGRAMMING