DoorKing 1802 - Manual (Page 39)

39
3.4.5 Flash Entry Codes
This programming sequence sets up "FLASH" four-digit entry codes. Flash codes are entry codes
that will operate on a specific day of the month only - they will not operate before or after the
programmed day. The flash code will be valid for a single 24-hour period only. For example, if you
program a flash code on July 1st to be active on the 10th, the code will become valid at 00:00 AM on
July 10th and expire at 11:59 PM. The code will not be valid on August 10th. You can program up to
eight flash codes in the system. Flash codes 1 through 4 will activate relay 1, flash codes 5 through 8
will activate relay 2.
1. Press

and enter the four-digit MASTER CODE
BBBB
(beep).
2. Enter the flash code number (1 - 8)
B
then press (beep).
3. Enter the day of the month that the code is to be active
BB
then press (beep).
4. Enter the four-digit FLASH ENTRY CODE
BBBB
then press (beep).
5. Repeat steps 2 through 4 to enter additional flash codes.
6. Press  TOGETHER to end this programming step (beeeeeep).