d&b D6 Software - Manual (Page 18)

Link A B off
Link A»B
D6 Stage right
Q7
-3.0dB -3.0dB
CUT HFA EQ 0.01 CSA EQ
Q-SUB
+0.0dB
L
100
L
Fig. 9: Link A»B indication on the Main
screen
The EQ and/or Delay settings of both channels can be linked using the
"Link A»B" function. These functions are then controlled in the Channel
A menu, in the Channel B menu the linked functions cannot be edited.
On the "Main screen" the "Link A»B" function is indicated by altering
the center line to arrows as shown in the graphic opposite.
Selecting "Link A»B" and pushing the encoder allows the setting of the
following modes:
off Both controller channels are operated independently.
EQ The EQ function of controller Channel B is linked to
controller Channel A.
Delay The Delay function of controller Channel B is linked to
controller Channel A.
EQ+Delay Both the EQ and Delay function of controller Channel
B are linked to controller Channel A.
AmpPreset 1 AmpPreset
D6 amplifiers provide AmpPresets which contain all important user
settings of the entire device such as input, output and channel
configurations, EQ and delay settings.
Using the AmpPresets a sound system can be operated in different
configurations (e.g. "Conference", "Music" or "Emergency Call") without
the need of transmitting all detailed settings of the devices used.
There are three types of AmpPreset memories:
User
Nine Presets which can be accessed locally or via the d&b Remote
network (R10 Service software from V1.0.6). These Presets are used to
set the complete D6 to a previously defined configuration for a
particular application and can be named individually.
Alarm
Three Presets which can only be accessed via the d&b Remote network
(R10 Service software from V1.0.6). Intended for use in alarm systems
to protect the system settings against local modifications.
Backup
Three Presets which can only be accessed the d&b Remote network (R10
Service software from V1.0.6). Intended for temporary use to back up
the current system settings when another Preset is loaded.
AmpPreset Last 1
Back Select 1
Preset Name
Recall Store Clear Ok?
*
The AmpPreset menu item indicates the last Preset number loaded and
is marked by a " " if any setting has been modified since loading. The
menu below provides the functions Select, Recall, Store, Clear and a
name field to manage the Presets.
D6 Software manual (Firmware V1.x.x) (1.3 EN) Page 18 of 32