d&b Vi - Manual (Page 23)

2. Attach the Mounting frame to the first cabinet
1. Lower the frame onto the cabinet until the Front links fit into the
slots at the front of the frame.
2. Insert the second Locking pins of the cabinet's Front links on
both sides.
3. At the rear of the cabinet, align the frame's Rear link with the
appropriate hole on the rear rigging strand of the cabinet.
4. Reinsert both Locking pins.
3. Add second/further cabinet(s)
1. Prepare the Front links of the next cabinet as described in
Þ Chapter 2. "Rigging concept and components",
Þ "Cabinet's rigging mechanism" on page 16.
2. Lift the current assembly to a suitable working height.
3. Position the next cabinet below the assembly.
4. Lower the assembly onto the cabinet until the Front links of the
bottom cabinet fit into the slots of the upper cabinet.
5. Insert the second Locking pins of the cabinet's Front links on
both sides.
6. On the rear rigging strand, release the Locking pins of both
cabinets.
7. Fold out the Rear link of the upper cabinet.
8. Reinsert the Locking pin on the upper cabinet.
9. Fold the Rear link into the rigging strand of the bottom cabinet.
10. Reinsert the two Locking pins on the bottom cabinet.
d&b Vi Rigging manual (1.2 EN) 23