d&b Vi - Manual (Page 35)

6.1. Visual and functional inspection
WARNING!
Potential risk of personal injury and/or
damage to material
To eliminate the potential risk of accident due to malfunctioning of
a component, regularly inspect all system components.
Cabinet enclosure
–
Visual inspection of all fitting plates for obvious damage (e.g.
cracks or corrosion).
– Visual inspection of the rear rigging strand for obvious
damage (e.g. cracks, deformation or corrosion) including all
drilled holes of the component.
– Inspection of all fitting plates including front grills to ensure
they are securely attached.
Front and Splay (Rear) links
Visual inspection regarding deformation and damage (e.g. cracks
and corrosion) including all drilled holes of the component.
Locking pins
Visual inspection for deformation, cracks and corrosion of the
component.
Flying and Mounting frames
Visual inspection regarding deformation and damage (e.g. cracks
and corrosion) including all drilled holes of the component.
6.2. Disposal
When out of use the rigging components must be disposed of in
accordance with the national environmental regulations.
Ensure that damaged rigging components are disposed of in a
way that they cannot be used again.
6. Care and maintenance / Disposal
d&b Vi Rigging manual (1.2 EN) 35