Doremi H2S-30 - Manual (Page 11)

3 H2S OSD Menu System Overview
The H2S-30 is configured using the IR remote control to access the menu system through the
OSD (see Section 4). Or by using the Doremi Universal Interface Software (DUIS) - see Section
5.
3.1 Input Menu
The Input menu can be used to set up the input parameters.
Sub-Menu Value Description
Interface HDMI/DVI
Pattern Input interface setting.
Pattern produces 100% color
bar patterns with 8 channels of
audio. The odd channels being
at 1kHz and the even channels
at 2kHz.
HDMI/DVI color Auto
RGB
RGB ext
YCbCr 601
YCbCr 601 ext
YCbCr 709
YCbCr 709 ext HDMI/DVI input color setting.
Auto: Usually RGB.
Ext: designates extended color
range (full bandwidth) as
opposed to limiting the color
spectrum to comply with ITU
standards.
Default EDID 720p 50
720p 60
1080i 25
1080i 30
1080p 50
1080p 60
WUXGA 50
WUXGA 60
Default EDID setting.
When you feed a signal to the
HDMI input, the H2S-30 has to
report a native resolution over
EDID. This menu allows the
user to change the default
resolution of the H2S-30
between the available formats.
CAUTION: Disconnect the
HDMI/DVI source before
changing this setting.
H2S.OM.001539.DRM Page 11 of 40 Version 1.4
Doremi Labs