Doremi H2S-30 - Manual (Page 12)

3.2 Output Menu
The Output menu can be used to set up the output parameters. See table below for more
information.
Sub-Menu Value Description
Interface SDI The output interface is set to
SDI by default. It is the only
output interface available.
SDI Color Auto
RGB
RGB ext
YCbCr 601
YCbCr 601 ext
YCbCr 709
YCbCr 709 ext
XYZ’ Set the SDI output color mode
Auto: 601 (SD) 709 (HD), RGB
(2K)
Ext: designates extended color
range (full bandwidth) as
opposed to limiting the color
spectrum to comply with ITU
standards.
Note: XYZ Colorspace is non-
linear.
SDI Resolution NTSC
PAL
720p
1080i/sf
1080p
2Kp
2Kp Flat
Match Input
Set the SDI output pixel
resolution.
Match Input: In this mode, the
SDI output will have the same
resolution as the input source.
H2S.OM.001539.DRM Page 12 of 40 Version 1.4
Doremi Labs