Doremi H2S-30 - Manual (Page 19)

3.7 System Menu
The System menu allows access to the system parameters.
Sub-Menu Description
Save Save current settings to flash.
Select to Save, when the “?” appears select again
to confirm
Firmware: x.y Firmware version
Serial: zzzzzzz Serial number
License: uuuuuuuu License number
Temp: vv C Temperature (in degree Celsius)
Standby Standby mode: Puts the unit in Power Down
mode
Auto Standby Auto Standby mode: Sets the idle time duration
before the unit goes in power down mode
automatically
IR Infra-Red. To avoid IR interference with multiple
H2S-30 units, assign each a different IR code
from 0x0 to 0xF (16 total) default is 0. Set the DIP
switch on the Doremi IR remote accordingly
The IR channel can also be set to OFF, which
disables the IR remote control completely
3.8 Status Menu
The Status menu can be used to view the Input and Output status.
Sub-Menu Description
In:
Out: Input and Output format status information
H2S.OM.001539.DRM Page 19 of 40 Version 1.4
Doremi Labs