Doremi S2H-30 - Manual (Page 23)

5 Doremi Universal Interface Software (DUIS)
5.1 DUIS Installation
• To install the Doremi Universal Interface Software, follow the steps below:
• Plug the USB cable between the S2H-30 and an available USB port on a computer.
• If the "Found New Hardware Wizard" window appears click “Cancel”.
• Run the installation package by double-clicking on the file
“Doremi_Universal_Interface_Software-4.2.2.0.exe,” which can be downloaded from:
http://www.doremilabs.com/
• After the installation is over, the "Found New Hardware Wizard" will appear:
Note: For Windows 7 users, the "Found New Hardware Wizard" will not appear.
• Go through all the steps shown below:
• Select the “No, not this time” option and then click “Next >” (see Figure 9).
Figure 9: ”Found New Hardware Wizard” Window Step 1
• When asked for the type of software installation, choose the option “Install the software
automatically (recommended).” See Figure 10 for more information.
S2H.OM.001540.DRM Page 23 of 39 Version 1.4
Doremi Labs