Doremi S2H-30 - Manual (Page 37)

6 Firmware Update
The firmware can be updated through a USB using the DUIS. In case one of the files listed in
the procedures below is missing, please contact Doremi Labs.
Note: The S2H-30, H2S-30, and GHX-10 all use the same firmware version, which is included
with the DUIS software.
6.1 USB Update
The firmware can be updated through USB using the Doremi Universal Interface Software as
presented in Section 5.4.7 .
To perform a update with a USB, follow the steps below:
• Connect the S2H-30 to the computer using the USB cable provided with the unit.
• Start the Doremi Universal Interface Software (see Section 5 ).
• Go to the “System” tab (see Section 5.4.7 ).
• Click on the “Firmware upgrade” button.
• Click the Browse button and select the firmware file (e.g: “ghx_1.6.0.bin”). Then click the
“Upgrade now” button (see Figure 24).
Figure 24: Firmware Update - Browse Window
• Once the update is completed, cycle the power of the S2H-30 unit.
S2H.OM.001540.DRM Page 37 of 39 Version 1.4
Doremi Labs