3 image tab – Doremi S2H-30 User Manual
Page 30
5.4.3 Image Tab
The Image tab is illustrated below in Figure 17.
Figure 17: S2H-30 Control Panel Image Tab
All parameters are explained earlier in this manual in Section 3.3.
•
To define either an Input or Output Gamma Curve, click the corresponding “User” radio
button and then press the “Gamma Curves...” button.
•
From the Gamma Correction pop-up window (see Figure 18), you can adjust the
Gamma Curves by “Formula” by adjusting the slider bars in the “Formula Editing” section
or by loading a file.
•
To load a file, select the “File” radio button in the “Gamma Curves Source” section and
then press the “All Colors LUT..” button and browse for the appropriate file.
S2H.OM.001540.DRM
Page 30 of 39
Version 1.4
Doremi Labs
LUT User
Radio Button
Gamma Curves
Button