Paxton Superchargers Mustang Cobra, NOVI 1000 System - Manual (Page 24)

P/N: 4809640
©2006 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
03APR06 v1.0 01Cobra(4809640v1.0)
2
F. Attach the other end of the bypass valve
assembly to the fitting on the discharge tube .
Tighten the bypass valve assembly clamps .
(See Fig. 1-e .)
G. Install the inlet tube to the flex hose and
attach the other end to the supercharger .
Attach the bypass hose to the inlet tube and
secure with the Paxton-supplied hose clamp
(See Fig. 1-f .)
Adjust for the best fit and tighten all hose
clamps . Remove the rubber hose from the
crankcase evac plastic barb fitting located on
the passenger side valve cover . Attach the
supplied hose to the plastic barb fitting and
route the hose forward to the 90 degree brass
fitting on the plastic inlet tube . The super-
charger assembly is completed . (See Fig. 1-g .)
Fig. 1-e
Fig. 1-f
Fig. 1-g