Adtec digital DPI-1200 (version 01.04.08U) Manual - Manual (Page 16)

The following diagram illustrates the structure and flow of the System Menu on the Adtec
DPI-1200 device:
Login
Item Function Options API Command
Login If the front panel is in a ‘logged out’
state, all configurations are read only.
User must login to change values. N/A N/A
Login
Duration Specifies the time-out value for
automatically logging out of the front
panel once a user logs in for security
purposes. Setting a time of 0 disables
automatic logout capabilities 0 - 9 ( minutes ) *.SYSD LDR
Network Sub-menu
Item Function Options API
Command
Ethernet IP
Address IP address of unit on your network user-defined using
<left/right arrow>
and <select>
buttons
default is
192.168.10.48 *.SYSD IPA
Ethernet
Mask Defines the unit relative to the rest of
your network user-defined using
<left/right arrow>
and <select>
buttons
default is
255.255.255.0 *.SYSD IPM
Ethernet
DHCP Dynamic Host Configuration Protocol;
allows the device to self-locate network
Ethernet parameters On (finds own DHCP
Address)
Off (defaults to last
entered IP Address)
default is OFF *.SYSD
DHCP
GigE IP
Address route of traffic in/out on IPTV user-defined using
<left/right arrow>
and <select>
buttons
default is
192.168.20.48 *.SYSD IPA
eth1
GigE Mask defines unit relative to the rest of an user-defined using *.SYSD IPM