Adtec digital DPI-1200 (version 01.04.08U) Manual - Manual (Page 38)

Numeric identifier or Headend ID
Range 001- 099
The records within the SCH file follow the following format. Each record is terminated by a
carriage return and line feed. Each record will all be at least 77 bytes in length. The fields
of each record are determined by its byte position. Each field is separated by a space
character. All times are formatted in military time.
Field # Field Name Bytes Description
1 Event Type 1-3 Type of event defined by record
(LOI, REM,END, NUL)
2 Scheduled Date 5-8 T&Bs approximation of the date
when the event will occur
(formatted - MMDD)
3 Scheduled Time 10-5 T&Bs approximation of the time of
day when the event will occur
(formatted HHMMSS)
4 Window Start Time 17-20 Time of day to begin window of
opportunity for event to occur
(formatted - HHMM)
5 Window Duration Time 22-25 Length of window of opportunity for
event to occur (formatted - HHMM)
6 Break Number Within Window 27-29 Break sequence number within
window of opportunity for event to
occur
7 Position Number Within Break 31-33 Position sequence number for event
within break
8 Scheduled Length 35-40 Scheduled event length
(formatted - HHMMSS)
9 Actual Aired Time 42-47 Actual aired time of day used in
VER file. (Formatted HHMMSS)
10 Actual Aired Length 49-56 Actual aired length used in VER file
(formatted - HHMMSSCC)
11 Actual Aired Position Within
Break 58-60 Actual sequential position number
that event occurred in. Used in VER
file
12 Spot Identification 62-72 T&Bs spot identification code used
by adManage as the commercial file
name. See Headend>File Name
Length configuration on how this
spot ID is converted into a file
name.