Adtec digital DPI-1200 (version 01.04.08U) Manual - Manual (Page 33)

The coax cable, from the DPI, will connect to a port (1-4 illustrated below). If the
connection is recognized, the corresponding LED with the same number will light up Green.
4 port DVB-ASI Input Module
IP - Connection of the DPI-1200 will need to be on the same IP Ingest Network as any
other IP Input Stream going to the DM6400. A standard GigE Ethernet Cable will be used.
Note: Please note all physical connections and their labels. This information is needed to
configure the DPI properly to work with the attached splicer.
Grooming your ads into the channel
Once you have properly configured your splicer with all of the channels you are wanting to
output and the DPI has been configured with the proper IP and channel information
matching that of the splicer, the corresponding output program will have [Ad Server
Connected] attached to the output name. (illustration below)
CherryPicker and Motorola are registered trademarks of their respective companies
RGB Broadcast Network Processor (BNP) ™
Screen and guide samples are taken from RGB BNPxr Version: 1.2.5 Build# 18453
Licensing