Adtec digital DPI-1200 (version 01.04.08U) Manual - Manual (Page 55)

90001 TRACE_MSG_SCTE30_BASE,
// 90002 TRACE_MSG_SCTE30_APPSTART,
// 90003 TRACE_MSG_SCTE30_PROTOCOL_ESTABLISHED,
// 90004 TRACE_MSG_SCTE30_LOST_CONNECTION,
// 90005 TRACE_MSG_SCTE30_CUEREQ,
// 90006 TRACE_MSG_SCTE30_SPLICEREQ,
// 90007 TRACE_MSG_SCTE30_SPLICERESP,
// 90008 TRACE_MSG_SCTE30_SPLICEIN,
// 90009 TRACE_MSG_SCTE30_SPLICEOUT,
// 90010 TRACE_MSG_SCTE30_GENRESP,
// 90011 TRACE_MSG_CMDCUE,
// 90012 TRACE_MSG_ERRCFGLOAD,
// 90013 TRACE_MSG_TRIGGER,
// 90014 TRACE_MSG_DPID_START,
// 90015 TRACE_MSG_SPLICETIMEOUT,
// 90016 TRACE_MSG_ABORT,
// 90017 TRACE_MSG_UPDATESTATUS,
// 90018 TRACE_MSG_SCTE30_INIT_FAILED,
// 90019 TRACE_MSG_ERROR_NOT_SPTS,
//91000 BASE_FOR_TRGRD = BASE_FOR_DPI + 1000,
//91001 TRACE_MSG_TRGRD_DTMF_ENABLE,
//91002 TRACE_MSG_TRGRD_DTMF_OBJECT_FAIL,
//91003 TRACE_MSG_TRGRD_DTMF_COM2_FAIL,
//91004 TRACE_MSG_TRGRD_NETSET_GET_MODE_INVALID,
//91005 TRACE_MSG_TRGRD_NETSET_SET_MODE_FAIL,
//91006 TRACE_MSG_TRGRD_NETSET_GET_TYPE_INVALID,
//91007 TRACE_MSG_TRGRD_NETSET_SET_TYPE_FAIL,
//91008 TRACE_MSG_TRGRD_NETSET_XML_PARSE_ERROR,
//91009 TRACE_MSG_TRGRD_NETSET_XML_PARSE_SUCCESS,
You may also see code in the range 250000 - 250009.
LOG_GENERAL_BASE = (MILLION/4),
// Process status
LOG_PROCSTAT_BASE = (0 + LOG_GENERAL_BASE),
LOG_PROCSTAT_START
LOG_PROCSTAT_END
LOG_PROCSTAT_INFO
LOG_PROCSTAT_WARN
LOG_PROCSTAT_ERR
LOG_PROCSTAT_CHILD
LOG_PROCSTAT_REGISTRATION
LOG_PROCSTAT_UNREGISTER
LOG_PROCSTAT_SIGNAL