Denon AV SURROUND RECEIVER AVR-5308CI - Manual (Page 24)


Get
ting Star
ted
Set
up
Pla
ybac
k
Remot
e Contr
ol
Multi-Zone
Inf
or
mation
Tr
oubleshooting
Antenna terminals
An F-type FM antenna cable plug can be connected directly.
AM/FM
Direction of broadcasting station
AM loop antenna
(small, supplied) FM antenna
75 Ω/ohms
Coaxial cable
FM indoor
antenna
(supplied)
Ground
AM outdoor antenna
Note to CATV system installer:
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the NEC
which provides guidelines for proper grounding
and, in particular, specifies that the cable ground
shall be connected to the grounding system of
the building, as close to the point of cable entry
as practical.
AM loop antenna assembly
Remove the vinyl tie and take
out the connection line.
Connect to the AM
antenna terminals.
Bend in the reverse direction.
a. With the antenna on top of
any stable surface.
Mount
b. With the antenna attached
to a wall.
Installation hole Mount on wall, etc.
HD Radio™ broadcast
HD Radio broadcast is a service that is only available within the United States.
Direction of broadcasting station
FM antenna
75 Ω/ohms
Coaxial cable
FM indoor antenna
(dipole, for HD Radio
broadcasting, supplied)
Ground
AM outdoor antenna
AM loop antenna
(large, for HD Radio broadcasting, supplied)
• To prevent interference, install at least 3.3 feet/
1 m away from the antenna connected to the
AVR-5308CI’s other AM tuner terminal.
Connection of AM antennas
1. Push the
lever.
2. Insert the
conductor.
3. Return the
lever.
NOTE
• Do not connect two FM antennas
simultaneously.
• Even if an external AM antenna is used, do not
disconnect the AM loop antenna.
• Make sure the AM loop antenna lead terminals do
not touch metal parts of the panel.
(White)
(Black)
Connections
(Black) (White)
AVR5308CIEU_100_初校作成中.indd 21 2008/05/26 9:38:34