Denon AV SURROUND RECEIVER AVR-5308CI - Manual (Page 57)


Get
ting Star
ted
Connections
Pla
ybac
k
Remot
e Contr
ol
Multi-Zone
Inf
or
mation
Tr
oubleshooting
Set
up
• When the input signal is 1080p the “Picture Adjust” setting will be
ineffective.
• Adjusting the “Contrast”, “Brightness”, “Chroma Level” and “Hue”
settings does not affect the HDMI input signal.
• “Hue” can be adjusted for composite video and S-Video signals.
• The adjustment values are stored for the individual input sources.
• “DNR”, “Enhancer”, and “Sharpness” are each effective with HDMI
output. However, they are ineffective with 480i/576i output.
f Hue
Adjust color hue.
[Variable range] –6 ~ 0 ~ +6
g DNR
Reduces the overall level of noise on the picture.
[Selectable items] OFF Low Middle High
h Enhancer
Enhances picture.
[Variable range] 0 ~ +12
j Sharpness
Adjusts picture sharpness.
[Variable range] –6 ~ 0 ~ +6
Picture Adjust
Adjust the picture quality.
F Menu tree F
Parameter
Picture Adjust
a Contrast
s Brightness
d Chroma Level
f Hue
g DNR
h Enhancer
j Sharpness
[Variable range] –6 ~ 0 ~ +6
a Contrast
Adjust picture contrast.
s Brightness
Adjust picture brightness.
d Chroma Level
Adjust picture chroma level (saturation).
[Variable range] 0 ~ +12
[Variable range] –6 ~ 0 ~ +6
j Audio Delay
Compensate for mismatched timing between video and audio.
Delay audio.
This sets the delay time for audio signals.
[Variable range] 0 ms ~ 200 ms
• This cannot be adjusted when playing in the EXT. IN, DIRECT or
STEREO mode (with “Crossover Frequency” set to “FIXED–THX–”,
“Front” set to “Large”, “Tone Defeat” to “ON” and “Room EQ” to
“OFF”).
• The adjustment range is 0 to 100 ms when the Auto Lipsync
Correction function is activated.
Operating from the main unit or the main
remote control unit
b The GUI menu is not displayed when carrying out this setting.
q Press the AUDIO DELAY button on the main unit or A. DL button on
the main remote control unit.
w Use the o p button to set.
Information
a MAIN ZONE
Shows information about settings for MAIN ZONE.
The items displayed differ according to the input source.
s ZONE2/3/4
Shows information about settings for multi-zone.
[Items to be checked]
Select Source Name Surround Mode Input Mode Room EQ
Dynamic EQ Video Select i/p Scaler Source Level
Rec Select Night Mode RESTORER
etc.
[Items to be checked]
Power Select Source Volume Level
Status
Shows information about current settings.
F Menu tree F
Information
Status
a MAIN ZONE
s ZONE2/3/4
AVR5308CIEU_100_初校作成中.indd 54 2008/05/26 9:41:28