Denon AV SURROUND RECEIVER AVR-5308CI - Manual (Page 93)

Multi-Zone Operations
Turning the Power On and Off
G Operation on the main unitH
Press <ZONE2 ON/OFF> , <ZONE3 ON/OFF> or <ZONE4 ON/OFF> for
the zone to be operated.
When the power turns on, the multi-zone indicator lights on the display.
G Operation on the remote control unitH
In the zone mode you want to operate, press [ON] or [OFF] .
Selecting the Input Source
G Operation on the main unitH
q Press <ZONE2/3/4 / REC SELECT> and select the zone to be adjusted.
w Turn <SOURCE SELECT> .
G Operation on the remote control unitH
In the zone mode you want to operate, press [SOURCE SELECT] .
Adjusting the Volume
G Operation on the main unitH
q Press <ZONE2/3/4 / REC SELECT> and select the zone to be adjusted.
w Turn <VOLUME> to adjust.
G Operation on the remote control unitH
In the zone mode whose volume you want to adjust, press [VOLUME] .
[Variable range] – – – –70dB ~ –40dB ~ 18dB
• The volume can be adjusted when GUI menu “Manual Setup”
– “Zone Setup” – “(select the zone)” – “Volume Level” is set to
“Variable”. The volume can be increased up to the value set at
GUI menu “Manual Setup” – “Zone Setup” – “(select the zone)”
– “Volume Limit” (vpage 39).
• The volume for ZONE2 and ZONE3 can be adjusted with the remote
control unit.
SOURCE SELECT
<ZONE2 ON/OFF>
<ZONE2/3/4/ REC SELECT>
<ZONE3 ON/OFF> <ZONE4 ON/OFF>
VOLUME
[Z2 ON]
[OFF]
[MUTE]
VOLUME
[ AMP]
SOURCE
SELECT
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
ZONE2 MENU
INPUT :DVD
SIGNAL:ANALOG
VOL. :-40dB
>Bass 0dB
HPF OFF
Treble 0dB
Lch Lev. 0dB
Rch Lev. 0dB
ZONE2 MENU
>Channel STEREO
Vol.Lev. VAR
P.On Lev. LAST
Vol.Limit OFF
Mute Lev. FULL
Turning off the Sound Temporarily
In the zone mode for which you want to mute the sound, press
[MUTE] .
The sound is reduced to the level set at GUI menu “Manual Setup”
– “Zone Setup” – “(select the zone)” – “Mute Level” (vpage 39).
To cancel, either adjust the volume or press
[MUTE] again.
The setting is canceled when the zone’s power is turned off.
• The source selected for ZONE3 is also output from the recording
output connectors.
• When the [MENU] is selected, it is possible to carryout “Zone
Setup” looking at the on-screen display in ZONE2. Also, when the
“OSD” is set as “ZONE2/ZONE3”, the on-screen display comes on
the ZONE2 monitor when ZONE3 has been operated so it is possible
to operate it looking at this.
NOTE
• When connected to the component video output connectors, the
on-screen display is not displayed.
• The digital signal from the digital input connectors (OPTICAL/
COAXIAL) are output to the analog audio connectors in ZONE2 and
ZONE3 in the case of PCM (2-channel) signals only.
• Digital audio signals input from the DENON LINK or HDMI connectors
cannot be played in multi-zone.
• “XM” or “HD Radio” cannot be selected with digital output
(OPTICAL) in ZONE2. Copyright-protected Network audio signals
(Internet radio, music server, USB, Rhapsody) cannot be output.
• In ZONE4, it is not possible to select “XM”, “HD Radio”, or sources
with no digital input signals (“TUNER”, “PHONO”, “iPod”, etc.).
Network audio signals (Internet radio, music server, USB, Rhapsody)
can be played as long as they are not copyright-protected.
• When certain digital signals are being input, noise may be output
from the ZONE2 and ZONE3 audio output connectors.
(ZONE3 or
ZONE4 mode)
[OFF]
[ON]
[MENU]
[ZONE SELECT]
[OFF]
[MUTE]
Multi-zone
indicator
[ON]
VOLUME
[MENU]
SOURCE SELECT
(Main remote control unit)
(Sub remote control unit)
0
Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Remot
e Contr
ol
Multi-Zone
Inf
or
mation
Tr
oubleshooting
AVR5308CIEU_100_初校作成中.indd 90 2008/05/26 9:43:32