Denon AV SURROUND RECEIVER AVR-5308CI - Manual (Page 26)


Get
ting Star
ted
Set
up
Pla
ybac
k
Remot
e Contr
ol
Multi-Zone
Inf
or
mation
Tr
oubleshooting
Multi Zone
ZONE2 or ZONE3 Pre-out Connections
• If another power amplifier or pre-main (integrated) amplifier is connected, the ZONE2 or ZONE3 pre-out
(variable or fixed level) connectors can be used to play a different program source in ZONE2 or ZONE3
the same time (vpage 85 ~ 90).
• When using a component video cable to connect the AVR-5308CI and input device, connect the ZONE2
monitor output to the component video connectors. When using an S-Video cable, connect the cable
to the S-Video or the video connectors. When using a video cable, connect the cable to the video
connectors.
• The ZONE2 (ZONE3) video out is only for ZONE2 (ZONE3).
R L
R L
"6%*0
3 -
*/ */
7*%&0
"6%*0
R L
R L
"6%*0
3 -
*/
"6%*0 7*%&0 7*%&0
*/
7*%&0 $0.10/&/5
7*%&0
: 1 # 1 3
*/
4
7*%&0
*/
"69

065
ZONE2
Power
amplifier
Input Output
Infrared
retransmitter Infrared
sensor Extension jack for future use.
NOTE
• For the audio output, use high quality pin-plug cords so that no induction humming or noise is produced.
• For instructions on installing and operating separately sold devices, refer to the respective devices’
operating instructions.
• To conduct multi-zone playback, see “Amp Assign / Multi-Zone Connections and Operations” (vpage
85 ~ 90).
Monitor
"6%*0

*/
015*$"-
"6%*0

*/
015*$"- Monitor
Power
amplifier
ZONE3
ZONE2 or ZONE4 Optical Connections
AV amplifier
(ZONE2)
AV amplifier
(ZONE4)
The AVR-5308CI is equipped with Optical output connectors for ZONE2 and ZONE4. If a bit-stream amp is
rigged-up, these zones can also be used to enjoy home theater.
• Connect the monitor for ZONE2 the same as the “ZONE2 or ZONE3 Pre-out Connectors”. (vSee left
column).
• If the signal inputted to ZONE2 is analog, change to PCM(2-channel) signal, and output it from ZONE2
optical output connectors.
Connections
AVR5308CIEU_100_初校作成中.indd 23 2008/05/26 9:38:48