Denon AV SURROUND RECEIVER AVR-5308CI - Manual (Page 48)


Get
ting Star
ted
Connections
Pla
ybac
k
Remot
e Contr
ol
Multi-Zone
Inf
or
mation
Tr
oubleshooting
Set
up
g Video
Setting the video source.
Video Select
Switch video input source while listening to audio signal.
[Selectable items]
DVD HDP TV/CBL SAT VCR DVR-1 DVR-2 V.AUX
SOURCE
Video Convert
Automatically convert video input signal to monitor output format.
[Input source]
DVD HDP TV/CBL SAT VCR DVR-1 DVR-2 V.AUX
[Selectable items] ON OFF
NOTE
• For optimum video performance, THX recommends that you set the
conversion mode to “OFF” to use video signals pass through system
without up conversion.
Example: The video input signals from the component video can
be enjoyed through the video output signals from the
component video.
• When a non-standard video signal from a game machine or some
other source is input, the video conversion function might not
operate. If this happens, please set the conversion mode to “OFF”.
Operating from the main unit
Press the VIDEO SELECT button, then turn the SOURCE SELECT knob
until the desired picture appears.
b
To cancel, press the main unit’s VIDEO SELECT button, then turn the
main unit’s SOURCE SELECT knob and select “SOURCE”.
NOTE
• It is not possible to select HDMI input signals.
• When playing HDMI video input signals, the analog video signal of
another input source cannot be selected for the HDMI video output.
• Input sources for which “Delete” is selected at “Source Delete”
cannot be selected.
i/p Scaler
Make settings for i/p scaler function.
[Selectable items] A to H A to H & H to H OFF
• This can not be set when “Video Convert“ is set to “OFF”.
• The “A to H & H to H” can be set to the input source assigned to the
HDMI input connector.
• “A to H & H to H” setting:
• Deep color (10 bit/12 bit) signals are converted into 8-bit signals.
• The i/p scaler function does not work if xvYCC or computer’s
resolution signals are input.
Resolution
Make settings for resolution of HDMI video output signal.
[Selectable items] Auto 480p/576p 1080i 720p 1080p
• This can be set when “i/p Scaler” is set to anything other than
“OFF”.
• When the “i/p Scaler” is set to “A to H & H to H”, the resolutions can
be setup to the analog video input signal and HDMI input signal.
This can be set when “i/p Scaler” is set to anything other than “OFF”.
Aspect
This sets the aspect ratio when outputting 480i/576i or 480p/576p
input signals from the HDMI output connector.
[Selectable items] Full Normal
This can be set when “i/p Scaler” is set to anything other than “OFF”.
Progressive Mode
Select optimum progressive mode for video material.
[Selectable items] Auto Video1 Video2
Operating from the main unit
Press the SCALE button.
Auto 480p / 576p 1080i
1080p 720p
h Input Mode
Make input mode and decode mode settings for this source.
The selectable input modes depend on the input source and
“Assign” setting (vpage 46, 47).
Input Mode
Set the input mode for this source.
[Input source] TUNER PHONO
(
iPod
)
[Selectable items] Analog EXT. IN
[Input source] NET/USB XM HD Radio
[Selectable items] Auto EXT. IN
[Input source]
CD DVD HDP TV/CBL SAT VCR DVR-1 DVR-2
V.AUX
[Selectable items]
Auto HDMI Digital Analog EXT. IN
• When a digital signal is properly input, the “ ” indicator lights on
the display. If the “ ” indicator does not light, check the digital
input connector assignment and the connections.
• The surround mode cannot be set if the input mode is set to “EXT.
IN”.
Operating from the main unit or main remote
control unit
Press the INPUT MODE button on the main unit or the INPUT button
on the main remote control unit.
Auto HDMI Digital
Analog EXT. IN
z 1: This can be selected for input sources for which the GUI menu
“Assign” setting is set to “HDMI” (vpage 46). Excluding CD.
z 2: This can be selected for input sources for which the GUI menu
“Assign” setting is set to “Digital” (vpage 46).
AVR5308CIEU_100_初校作成中.indd 45 2008/05/26 9:41:06