Denon AV SURROUND RECEIVER AVR-5308CI - Manual (Page 62)

1
Either turn <SOURCE SELECT> or press [TUNER]
(AMP mode) to select “TUNER”.
2 To operate using the main remote control unit, set the
remote control unit to the TUNER (
) mode.
(vpage 76 “Remote Control Unit Operations”)
3
Press [SEARCH] to select “PTY”.
4 Watching the display, press ui to call out the desired
program type.
5
Press [CHANNEL] .
PTY search begins automatically.
b If there is no station broadcasting the designated program type
with the above operation, all the reception bands are searched.
b The station name is displayed on the display after searching
stops.
6
To continue searching, repeat steps 2 to 4.
b If no station broadcasting the designated program type is found
when all the frequencies have been searched, “NO PROGRAMME”
is displayed.
PTY Search
Use this function to fi nd RDS stations broadcasting a designated
program type (PTY).
For a description of each program type, refer to “Program Type
(PTY)”.
1 Either turn <SOURCE SELECT> or press [TUNER]
(AMP mode) to select “TUNER”.
2 To operate using the main remote control unit, set the
remote control unit to the TUNER (
) mode.
(vpage 76 “Remote Control Unit Operations”)
3 Press [SEARCH] to select “TP”.
4
Press [CHANNEL] .
TP search begins automatically.
b If no TP station is found with the above operation, all the reception
bands are searched.
b The station name is displayed on the display after searching
stops.
5
To continue searching, repeat steps 2 to 3.
b If no other TP station is found when all the frequencies have been
searched, “NO PROGRAMME” is displayed.
TP Search
Use this function to fi nd RDS stations broadcasting traffi c
programs (TP stations).
1 Either turn <SOURCE SELECT> or press [TUNER]
(AMP mode) to select “TUNER”.
2 To operate using the main remote control unit, set the
remote control unit to the TUNER (
) mode.
(vpage 76 “Remote Control Unit Operations”)
3 Press [SEARCH] to select “RT”.
b While receiving an RDS broadcast station, the text data broadcast
from the station is displayed.
b To turn the display off, press o p.
b If no text data is being broadcast, “NO TEXT DATA” is displayed.
RT (Radio Text)
“RT” appears on the display when radio text data is received.

Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Remot
e Contr
ol
Multi-Zone
Inf
or
mation
Tr
oubleshooting
<SOURCE SELECT> <STATUS>
ui
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
[ TU]
[CHANNEL]
[SEARCH]
ui
[TUNER]
[d f]
[SAT TU]
[ TU]
( mode)
(AMP mode)
(AMP mode)
( mode)
AVR5308CIEU_100_初校作成中.indd 59 2008/05/26 9:41:47