Denon AV SURROUND RECEIVER AVR-5308CI - Manual (Page 75)

Dolby Headphone recording
When REC OUT mode is set to “SOURCE”, with the AVR-5308CI it
is possible to output signals encoded in the Dolby Headphone mode
from the recording output terminal and record them on a separate
recorder.
1
The Dolby Headphone play mode is set when
headphones are connected to
<PHONES> during
playback in the STANDARD (DOLBY/DTS Surround)
mode.
When this is done, signals encoded in the Dolby Headphone
mode are automatically output from the recording output
terminals (analog and digital) and can be recorded.
2 Select the parameters and set the desired mode.
Start recording.
Refer to the “Dolby Headphone” (vpage 49).
NOTE
Do not disconnect the headphones during recording.

Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Remot
e Contr
ol
Multi-Zone
Inf
or
mation
Tr
oubleshooting
• To cancel, press <ZONE2/3/4 / REC SELECT> , then turn <SOURCE
SELECT> until “ZONE3 SOURCE” is displayed.
• Make a test recording before starting the actual recording.
• Signals are only output to the analog REC OUT connectors when
the digital signals input to the digital input connectors (OPTICAL/
COAXIAL) are PCM (2-channel) signals.
• Digital audio signals input to the DENON LINK or HDMI connectors
are not output to the REC OUT connectors, so connect using the
OPTICAL or COAXIAL connectors.
• Sources selected with the REC OUT mode are output from ZONE3
as well.
• In the REC OUT mode, the remote control unit’s ZONE3 mode
buttons cannot be operated.
• When the “Digital Out” setting is set to “ZONE4 Select”, the
OPTICAL4 output connector becomes the ZONE4 output. When
using for recording, set to “Rec Select”.
• The “XM” and “HD Radio” digital audio output signals are not output
from the OPTICAL2, OPTICAL3 or OPTICAL4 output connectors.
Also, network audio signals (Internet radio, music server, USB,
Rhapsody) are not output if they are copyright-protected.
NOTE
• Recordings you make are for your personal enjoyment and should
not be used for other purposes without permission of the copyright
holder.
• When “DENON LINK” is assigned at the GUI menu “Assign” setting,
the PCM signals, network audio signals (Internet radio, music server,
USB and Rhapsody), XM signals and HD Radio signals input from the
digital input connectors cannot be output from the analog REC OUT
connectors.
• Input sources for which “Delete” is selected at “Source Delete”
cannot be selected.
AVR5308CIEU_100_初校作成中.indd 72 2008/05/26 9:42:41