Avery Dennison Sierra Sport4 9493 Vehicle Mount - Manual (Page 9)

9
A t t a c h i n g t h e P r i n t e r
To attach the printer on the vehicle mount:
1. Use the M3 allen wrench to remove the plastic
strap buttons on each side of the printer and
replace them with the aluminum buttons
included with the vehicle mount hardware.
2. Make sure the printer’s battery and
communication cable are installed.
3. Insert the printer into the slots on the vehicle
mount using the strap buttons as a guide.
4. Push down firmly on the printer so it locks
completely in place
P r i n t i n g
Refer to the printer’s documentation for
information on loading supplies and printing.
Al u m i n u m s t r a p
b u t t o n
P r i n t e r
s l o t s