Avery Dennison 7411 Print Server - Manual (Page 59)

H e l p C o m m a n d s
For help at any time, type “Help” and a list of available commands appears.
The Help command builds on itself, because for each command you type,
more details appear for each option.
Syntax: Help set
DEFAULT Set parameters to factory defaults
EN Network
Parameters
LOAd Firmware update parameters
PAssword <password> Set console password
PORt <name> .
Parameter for port <name>
PROtect <password> Set update password
SERVEr Server and LAT parameters
SERVIce <name> Service Parameters
SNMP
SNMP Variables
Syslog Syslog Parameters
DNS DNS Parameters
STRing n "..." BOT/EOT string
IP LPD/TCP Parameters
POP3
POP3 Parameters
SMTP SMTP Parameters
NETWare
Netware Parameters
POWERON <delay-sec> Power on delay
Displays a list of the available help commands for “Set.”
Note: For any command that uses SET, you can also use SHOW to view
the current setting.
Telnet Console Commands 6-3