Avery Dennison 7411 Print Server - Manual (Page 65)

SET EN INAP [PAP/MSCHAP_V2]
Sets the EAP inner authentication protocol.
SET EN IROAM [DISable/STRICT/FLEXible]
Controls whether the radio frequencies are set based on the radio configuration or
from its access point. Disabled uses the radio defaults. When in Ad-Hoc mode, you
must set the region of operation. See “
SET EN REGDOMain ”. Flexible uses
access point settings if present; otherwise the radio defaults are used. When in Ad-
Hoc mode, you must set the region of operation. See “
SET EN REGDOMain ”.
Strict the access point regulatory frequency information. When using an access
point, there is no need to set the region of operation.
SET EN PW <password>
Sets the password for 802.11b/g EAP authentication.
SET EN KEY# <1/2/3/4>
Sets which WEP key number to use (default is 1).
SET EN KEYVAL <WEPkey>
Sets WEP key value. Must be hexadecimal.
SET EN MODE [IN/AD]
Sets 802.11b/g wireless mode to infrastructure or Ad-Hoc mode.
SET EN RAdio [802.11b/802.11b-g]
Sets the radio type.
SET EN REALM <realm>
Sets the realm portion of the 802.11b/g EAP authentication ID.
Telnet Console Commands 6-9